API 3124MB+ 4 Way Mic Pre And Stereo Mixer
- product images
- product info
- product specs
Each channel has phase, 48V, pad, DI (470 Kohm), input gain, output level, pan, an aux send, an unbalanced insert (tip send ring return) and a balanced direct out on XLR. 19". 1U.
Uses API 2520 Op-Amp
Classic Console Circuit
Four XLR Mic Inputs
Four 1/4" Un-Balanced Inputs
Front Panel Polarity Switch
Front Panel 20 dB PadSwitch
Front Panel Mic/Line Switch
Front Panel 48V Power Switch
Output Clips at +30 dBm
Both the 3124+ and the 3124mb+ are designed with the professional engineer in mind, giving the highest possible quality 4 channel mic preamp and with the 3124mb+, an audio mixer with a transformer balanced output.that keeps the size and price at a reasonable level. Both models are equally at home in the control room, the studio, and news or recording truck, at the house console, on the stage, or at the artist's disposal for the source of his music.
The model 3124mb+ utilizes the same microphone preamp circuit that is used in all API consoles. It uses the RE-115 K mic input transformer and the same output transformer that is used in all API equalizers. All four mic inputs of the 3124mb+ are powered by an internal 48 volt phantom power supply, front panel switchable for each channel. Also provided is a front panel 20 dB pad switch that effects both the Mic and Line in.
The model 3124mb+ can provide up to 65 dB of gain to an output clip level of +30 dBm. The Hi-Z front panel input goes directly to the op-amp, allowing a low level input such as a guitar or bass to be amplified without a matching transformer or direct box. This Hi-Z input can accept input levels as high as +22, making it perfect for keyboards and other high level devices. The rear output is an XLR connector.
The model 3124mb+ is a 3124+ with the addition of a complete stereo mixer, plus a transformer balanced out. In conjunction with the gain control of the 3124+, the 3124mb+ adds a stereo panner with a level control, and a post "fader" aux send. The stereo panners and the aux sends are bussed to master output controls and then to the rear panel jacks. A stereo AUX return is provided to return effects or cascade additional mixers for more inputs. The unique aux return pot acts like a panner to balance the left/right signal, yet staying stereo. It can also be used as a mono return.
|Short Description||4 x API 312 mix pres & mix buss: in a 1U rack, with the addition of a stereo mix bus with output level control, balanced L/R outputs on stereo jacks, and a stereo aux return with level control (this input can also be used to cascade another 3124+MB for 8 channels of API mic pre).|
|Demo in Store||N/A|
|Valve / Solid State||No|
|Side Chain Input||No|
|High Pass Filter||No|
ADD CUSTOM BUNDLE OF YOUR CHOICE
AND SAVE UP TO 65% ON PLUG-INS
CHOOSE YOUR CUSTOM BUNDLE:
No UAD-2 CUSTOM BUNDLE
Universal Audio UAD Custom 2 Bundle£190.83
SAVE UP TO 25%
Universal Audio UAD Custom 3 Bundle£282.50
SAVE UP TO 33%
Universal Audio UAD Custom 6 Bundle£440.83
SAVE UP TO 50%
Universal Audio UAD Custom 10 Bundle£624.17
SAVE UP TO 60%
Universal Audio UAD Ultimate 5 Upgrade Bundle£3,165.83
SAVE UP TO 65%