020 84452446
Audio Technica AT4033aSM

Audio Technica AT4033aSM

  • product images
  • product info
  • product specs
  • reviews

Audio Technica AT4033aSM

The side-address Audio Technica AT4033aSM offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals. A strong up-front presence characterizes the sonic signature of this 40 Series pro-audio classic. The Audio Technica AT4033aSM's 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals.

Features:

A strong up-front presence characterizes the sonic signature of this versatile pro-audio classic
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use
Floating-construction capsule assembly provides isolation from noise and vibration
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
Custom shock mount provides superior isolation

Specifications:

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 30-20,000 Hz
Low Frequency Roll-Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Noise: 17 dB SPL
Dynamic Range (typical): 128 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 3.2 mA typical
Switches: Flat, roll-off; 10 dB pad (nominal)
Weight: 13.4 oz (380 g)
Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Furnished: AT8449 shock mount for 5/8"-27 threaded stands; protective carrying case

Short Description A strong up-front presence characterizes the sonic signature of this versatile budget classic.
Demo in Store N/A
Manufacturer Audio Technica
Old Price N/A
Microphone Type N/A
Valve / Solid State N/A
Microphone Polarity N/A
Phantom Power N/A
Frequency Response N/A
High Pass Filter N/A
Output Impedance N/A

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Got a question about this product? We have the answer. CALL US: 020 84452446
contact Us
Inc. VAT: £365.00 Ex. VAT: £304.17
Usually shipped in 1-3 days.

Buy Now Pay Later

Finance Calculation for your - order

I would like to pay a deposit of -

  • 0%
  • 10%
  • 20%
  • 30%
  • 40%
  • 50%
  • 60%

I would like to pay over months, with the first payment deferred for months

test (29.80000000% APR Representative for 48 months)
10 Monthly payments of -
10% APR (representative)
Total Credit -
Interest Payable -
Total Amount Payable -

Total Amount Payable Includes Deposit Amount.

The figures shown are an illustration based on the cost of goods. Final details including shipping and discounts where applicable will be displayed on the checkout page.

Credit is provided by Hitachi Capital Consumer Finance, a division of Hitachi Capital (UK) PLC authorised and regulated by the Financial Conduct Authority.

KMR Audio Ltd trading as KMR Audio Ltd acts as a credit broker and is authorised and regulated by the Financial Conduct Authority.

IMPORTANT: Hitachi Capital rounds down the monthly payments, which may result in your total amount payable being less than the total cash price.

Digital & Analogue Audio Recording Studio Equipment from Uk & Europe’s Premiere Audio Gear Supplier - KMR Audio 2005-2015 - All Rights Reserved and Are Property of Respective Owners. Errors and omission excepted. Use of the site is governed by our terms and conditions.