Cranborne Audio EC1 (B-stock)

£549.00
£449.00 £374.17
This product is not available to purchase
SIngle-channel mic/line preamp and headphone amp based on the award-winning Camden 500 mic preamp and 500R8 8-slot 500 Series Rack.


This B-Stock unit comes in original packaging, as new.

A full warranty of one year will be issued with this purchase.


Condition: Excellent




At a glance

  • Discrete Mic/Line/Hi-Z preamp with ‘Camden’
  • Fully-discrete, transformerless design
  • ‘Mojo’ analogue saturation circuit
  • Headphone mixer with high-powered headphone amplifiers
  • Balanced XLR outputs and impedance balanced ¼” jack outputs for maximum connectivity into audio interfaces and other downstream equipment
  • Dedicated 1/4" ‘Link’ outputs for true instrument DI functionality and splitting instrument inputs to a backline amplifier
  • C.A.S.T OUT port for connecting Camden EC1 into 500R8/500ADAT
  • C.A.S.T IN port for connecting N22/N22H Cat 5 snakes to relocate Camden EC2 I/O elsewhere in the studio
  • External high-current 24v 1a power supply with latching connector
  • Designed, engineered and manufactured in the United Kingdom

The Cranbourne Camden EC1 combines the multi-award-winning Camden preamp technology with a reference-grade headphone amplifier to elevate your audio interface’s front-end to a professional level.
 

Award-Winning Pedigree

The Cranbourne Camden EC1 introduces one of the cleanest and most transparent preamps on the market into a standalone, desktop-friendly chassis that can integrate with any audio interface.

Designed to compete with the very best, the Camden preamp itself achieves unprecedented low-noise and low-distortion performance as well as frequency and phase linearity at all gain settings.

Capture your source with complete transparency; boost low-sensitivity microphones without adding noise and colouration; and capture instant and coherent transients without phase shift that cause summing abnormalities. Camden EC1 exhibits performance specifications that exceed the most revered ‘transparent’ preamps on the market.

It’s 12-way rotary Gain switch enables easy recallability of preamp gain whilst it’s dedicated mic, line, and hi-z input modes allows Camden EC1 to not only become your go-to mic preamp, but also a line-level saturator and instrument DI thanks to dedicated ¼” jack Link outputs for each channel.

Vintage Persona

Using it’s Mojo analogue saturation control, Camden EC1’s transforms from extraordinarily clean, natural, and precise sounding, into thick, gooey, and vintage-sounding at the turn of a dial.

With two discrete Mojo styles; Thump and Cream, Camden EC1 can perfectly imitate vintage transformer or valve-based preamps at the turn of a dial.

Mojo’s saturation is completely variable, allowing you to dial-in the amount of saturation you need for each source. Keep it at 3-4 for authentic preamp saturation or crank it up to 11 for a more exaggerated effect!

Perhaps most crucially and unlike transformer-based preamps, when you need something clean and transparent for a particular session/source, Mojo can be completely bypassed and removed from the signal using the pots’ built-in, true-bypass switch to reveal the true clarity of the Camden preamp design.

Record through Mojo to apply instant analogue colouration during tracking or send line-level sources through the Mojo to add vintage colouration to your DAW tracks or stereo bus during the mix phase.

Advanced Tracking And Reamping Tool

The Camden EC1’s reference-quality headphone amplifier and independent, 4ch line mixer allows for direct, zero-latency monitoring of the Camden preamp using headphones connected directly to Camden EC1’s front panel.  Monitor the preamp directly using headphones during mic placement to find the sweet spot of the instrument/source, or create a zero-latency, analogue headphone mix by mixing the preamp with external playback from dedicated Stereo Aux and Mono Ext Line Inputs.

Camden EC1 features an extraordinary Hi-Z instrument D.I. circuit with a dedicated ¼” jack Link output - the combination makes Camden EC1 the perfect tool for reamping bass and electric guitars on studio or stage. Simply connect your instrument to its Hi-Z input for unparalleled DI performance, and connect the ¼” Link output of the preamp to your amplifier/effects pedals for wet/dry recording and reamping.

C.A.S.T. Enabled

Camden EC1 also utilises Cranborne Audio’s unique C.A.S.T. system for distributing audio around the studio or stage using affordable Cat 5e, Cat 6, or Cat 7 cabling whilst achieving the highest sonic results.

Connect Camden EC1’s C.A.S.T. OUT port to Cranborne Audio’s 500R8 or 500ADAT, and you can send Camden EC1’s preamp directly to the interface's input ready for further processing and recording. At the same time through the same cable, 500R8/500ADAT transmit their built-in monitor mix directly to Camden EC1’s headphone mixer for monitoring.

This allows 500R8/500ADAT users to relocate their Camden EC1’s preamp and headphone amplifier into the live room using a single Cat 5e, Cat 6, or Cat 7 cable whilst freeing-up 500 series slots in 500R8/500ADAT for more EQ and Compressor modules and extra processing before hitting 500R8/500ADAT’s converters.

Meticulously Designed and Engineered In The UK

With an abundance of I/O available, Camden EC1 facilitates the maximum amount of flexibility with all 3rd party audio interfaces and recorders by including dedicated XLR outputs, Impedance balanced 1/4” jack outputs with 10dB PAD, and a Link output when using Camden EC1 as a DI.

Camden EC1 is another Cranborne Audio product engineered and designed under the team’s watchful eyes. Camden EC1 features elite audio specifications and application-based features that defies its price tag and is accessible for professional, project, and home studio engineers.

More Information
AT A GLANCE
  • Discrete Mic/Line/Hi-Z preamp with ‘Camden’
  • Fully-discrete, transformerless design
  • ‘Mojo’ analogue saturation circuit
  • Headphone mixer with high-powered headphone amplifiers
  • Balanced XLR outputs and impedance balanced ¼” jack outputs for maximum connectivity into audio interfaces and other downstream equipment
  • Dedicated 1/4" ‘Link’ outputs for true instrument DI functionality and splitting instrument inputs to a backline amplifier
  • C.A.S.T OUT port for connecting Camden EC1 into 500R8/500ADAT
  • C.A.S.T IN port for connecting N22/N22H Cat 5 snakes to relocate Camden EC2 I/O elsewhere in the studio
  • External high-current 24v 1a power supply with latching connector
  • Designed, engineered and manufactured in the United Kingdom
Demo in StoreNo
ManufacturerCranborne Audio
Short DescriptionSIngle-channel mic/line preamp and headphone amp based on the award-winning Camden 500 mic preamp and 500R8 8-slot 500 Series Rack.
Old Price£549.00
Valve / Solid StateSolid State
Channel CountDual Channel
DI InputYes
Side Chain InputNo
ChassisRackmount
Phantom PowerYes
High Pass FilterYes
Includes Dynamicsno
Includes EQno
Digital I/ON/A
Only registered users can write reviews. Please Sign in or create an account