020 84452446
DPA 2006A

DPA 2006A

DPA 2006A

View More Products from:

DPA Microphones
Inc. VAT: £745.00 Ex. VAT: £620.83
Usually ships in 1-3 days.
From per month

  • product Description
  • Additional Information
  • Reviews
The DPA 2006A Twin Diaphragm Omni Microphone is part of the Reference Standard Series and is built around the acclaimed DPA 4006 omni microphone, due to it's sound character and industrial design. The 2006A is great for miking and recording orchestra, acoustic piano, guitar, wind instruments, vocals and choirs. The 2006A from DPA features a Twin Diaphragm Capsule technology. This makes the 2006A well balanced for acoustic authenticity and true character. The capsules are loaded to the supreme Reference Standard preamps instead of the tiny miniature FET preamp from the miniature mics, offering even more air and precision. In a 2006 capsule two opposite facing miniature capsules are custom re-built into a double diaphragm, one-capsule composition. This combines the advantages of small capsules (fast impulse response and large frequency bandwidth) with lower inherent noise achieved from a larger diaphragm area. The main features of the 2006A include: Directional pattern: Omnidirectional Principle of operation: Pressure Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule Frequency range: 20 Hz to 20 kHz Frequency range, ± 2 dB: 50 Hz to 20 kHz with typ. 3 dB soft boost at 14 kHz Sensitivity, nominal, ± 2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A)) Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB) S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 78 dB(A) Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 130 dB SPL peak Minimum load impedance: 2 kohm Dynamic range: Typ. 114 dB Max. SPL, peak before clipping: 141 dB Switchable attenuator: 0 dB / -20 dB Output impedance: < 200 ohm Cable drive capability: 100 m (328 ft) Output balance principle: Impedance balancing with Active Drive Common Mode Rejection Ratio (CMRR): > 60 dB Power supply (for full specification ns): 48 V Phantom power (± 4 V) Current consumption: 2.8 mA Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase Colour: Matte black Microphone weight: 160 g (5.6 oz) Microphone diameter: 19 mm (0.75 in) Microphone length: 164 mm (6.5 in) Output voltage, RMS: > 5 V Polarity: +V at Pin 2 for positive sound pressure Temperature range: -40 °C to 45 °C (-40 °F to 113 °F) Relative Humidity (RH): Up to 90%
Short Description Twin Diaphragm Omni Microphone.
Demo in Store N/A
Manufacturer DPA Microphones
Microphone Type N/A
Valve / Solid State N/A
Microphone Polarity N/A
Phantom Power N/A
Frequency Response N/A
High Pass Filter N/A
Output Impedance N/A

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Digital & Analogue Audio Recording Studio Equipment from Uk & Europe’s Premiere Audio Gear Supplier - KMR Audio 2005-2015 - All Rights Reserved and Are Property of Respective Owners. Errors and omission excepted. Use of the site is governed by our terms and conditions.