Skip to the beginning of the images gallery

DPA 3532-S

£6,075.00 £5,062.50

Interest Bearing representative example >>

Cash Price £2500, Deposit £500, Loan amount £2000, 9.9% APR representative, Interest rate 9.9% p.a. fixed, 24 monthly repayments of £91.81, Total term of loan agreement 24 months, Total Amount payable £2703.44.

Call or Email for availability.

Large Diaphragm Condenser Microphones Type 4041-S A-B Stereo Kit.

Details

The DPA 3532-S is a complete A-B Stereo Kit consisting of two carefully factory-matched omnidirectional Large Diaphragm Microphones Type 4041-S with 130 V solid-state preamplifiers in a discrete class-A design. Included is also the Hi-Voltage Microphone Amplifier Type HMA5000 and a Stereo Boom all packed with cables in a handy carrying case with a foam insert.

The specially selected microphones are matched within 1 dB on both frequency response, sensitivity and self-noise. The maximum phase response difference from 50 Hz to 20 kHz is 10°. The frequency response from 10 Hz to 20 kHz with a 4-6 dB soft boost around 8 kHz matches the response of the highly acclaimed Type 4040 Hybrid Microphone. The two 4041-S are powered via the standard HMA5000 Microphone Amplifier, creating the DPA 3532-S A-B stereo microphone system that offers a totally transparent audio path with an exceptionally low noise floor of maximum 7 dB(A) and an SPL handling capability of 144 dB peak.

The DPA 3532-S is the ultimate choice for all professional A-B Stereo recordings.

DPA 3532-S Specifications:

Principle of operation: Pressure
Cartridge type: 24 mm (1 in) condenser w. stainless steel diaphragm
Power supply: 130 V via HMA5000
Frequency range, ± 2 dB: 10 Hz - 20 kHz with 4 - 6 dB soft boost at 8 kHz
Directional characteristics: Omnidirectional
Equivalent noise level A-weighted: Max. 7 dB(A) re. 20 µPa
Equiv. noise level ITU-R BS.468-4: Max. 19 dB
Capsule diameter: 24 mm (1 in)
Total harmonic distortion (THD): <0.5% up to 120 dB SPL peak, <1% up to 126 dB SPL peak
Preamplifier frequency range: 3 Hz to 40 kHz (+0 dB/-1 dB)
Output impedance: Matches HMA5000 input
Cable drive capability: From microphone to HMA5000: Up to 20 m With HMA5000: Up to 300 m (984 ft)
Microphone length: 170 mm (6.69 in)
Max. SPL, peak before clipping: 144 dB
Weight: 190 g (6.7 oz)
Dynamic Range: Typ. 119 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 87 dB
Connector: 7-pin modified XLR-M (High Voltage)
Matching tolerance (frequency response and sensitivity): ±0.5 dB (20 Hz - 20 kHz)
Phase deviation for kit: <5°