The DPA 4006C Omni Microphone is a compact recording microphone and part of the Reference Standard Series. The 4006C is great as a stereo pair and delivers transparent and authentic recordings every time.

The 4006C from DPA can be mounted, hung or concealed to suit your recording environments, such as theatres, opera and concert halls or places of worship. The 4006C can also be used for vocals, film, studio rooms and on-location. The 4006C is great for close miking of instruments such as double bass, trumpet and piano. The 4006C is truly dynamic.

Specifications:

• Principle of operation: Pressure
• Catridge type: Pre-polarized condenser
• Frequency range: 10 Hz to 20 kHz
• Frequency range, ± 2 dB: 20 Hz to 20 kHz
• Sensitivity, nominal ±2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
• Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
• Equivalent noise level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
• S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 79 dB(A)
• Total Harmonic Distortion (THD): < 1 % up to 134 dB SPL peak
• Dynamic range: Typ. 119 dB
• Max. SPL, peak before clipping: 140 dB
• Minimum load impedance: 2 kohm
• Output impedance: < 200 ohm
• Cable drive capability: 100 m (328 ft)
• Output balance principle: Impedance balancing with Active Drive
• Common Mode Rejection Ratio (CMRR): > 50 dB
• Power supply (for full specifications): 48 V Phantom power (± 4 V)
• Current consumption: 2.8 mA
• Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Color: Matte black
• Weight: 63 g (2.2 oz)
• Diameter: 16 to 19 mm (0.63 to 0.75 in)
• Capsule diameter: 16 mm (0.63 in)
• Length: 64 mm (2.5 in)
• Output voltage, RMS: > 4 V
• Polarity: +V at Pin 2 for positive sound pressure
• Temperature range: -40 °C to 45 °C (14 °F to 113 °F)
• Relative Humidity (RH): Up to 90%
• Matching tolerance: ± 0,5 dB
• Phase deviation for kit: < 5°