020 84452446
Empirical Labs Lil Freq

Empirical Labs Lil Freq

  • product images
  • product info
  • product specs
  • reviews

Empirical Labs Lil Freq

Equalisation - Empirical Labs Style!

The EQ Sections

HP – The High Pass section is a sharp filter that cuts all content below one of eight pre-selected frequencies. We call this particular filter a “colored” filter since it is very steep and has a special shape that prevents thinning out frequencies just above the “cutoff” frequency. The corner frequency is indicated by LEDs that glow softly when the section is bypassed, and brightly when the section is engaged. As with all the EQ sections in the Lil FrEQ, there is a dedicated bypass switch.

High and Low Shelving – These are very similar to your standard “Tone Controls”, but extremely high performance, providing exceptionally smooth boost and cut on the “bass” and “treble” frequencies.

Parametric EQ Sections – There are four sections of fully parametric EQ… possibly the cleanest parametric EQ section ever produced- operating below .0007% THD (Total Harmonic Distortion) at extremely high audio levels. Try finding those specs anywhere else!

Dynamic EQ Section – The DS section combines filters with a compressor-like circuit that can help contain and control excessive high frequency content such as sibilants, especially in the absence of other lower frequency content. There are two modes of operation, with threshold control as well as a frequency select control. There are four LEDs that indicate the amount of Gain Reduction: -1.5dB, -8dB, -14dB, -24dB. The DS section provides the highest performance, easiest to use, and most natural De-esser ever built, as well as a one of a kind, soft knee High Frequency Limiter. You will love it!

Specifications

Freq. Response
5 Hz to 140 kHz on transformerless inputs and outputs.
Transformer Output response is 10 Hz to 110 kHz .

Dynamic Range
120 dB from maximum output (.1% clipping) to minimum output. Greater than 110 dB signal to noise.

Distortion Ranges between .00056% and .005% depending on mode and settings. DS section has THD < .005%.

DC coupled Input and Outputs and one transformer coupled Output
High quality audio caps used internally.

Dynamic Time Constants
Attack is approximately .5 mS. Release .04 sec, fixed internally.
Short Description Versatile single-channel EQ with unique de-esser function
Demo in Store N/A
Manufacturer Empirical Labs
Old Price N/A
Valve / Solid State No
Q Type No
High Pass Filter No
Low Pass Filter No
High Frequency Range No
High Mid Frequency Range No
Mid Frequency Range No
Low Mid Frequency Range No
Low Frequency Range No
Bypass No
Channel Count No
Digital I/O No
Chassis No

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Got a question about this product? We have the answer. CALL US: 020 84452446
contact Us
Inc. VAT: £2,038.80 Ex. VAT: £1,699.00
Usually shipped in 1-3 days.
From per month

Digital & Analogue Audio Recording Studio Equipment from Uk & Europe’s Premiere Audio Gear Supplier - KMR Audio 2005-2015 - All Rights Reserved and Are Property of Respective Owners. Errors and omission excepted. Use of the site is governed by our terms and conditions.