Eve Audio SC203 Active Studio Monitor System
- product images
- product info
- product specs
The Eve Audio SC203 is a small two-way active monitor system comprising of master and slave loudspeakers for professional as well hobbyists and game users.
The Eve Audio SC203 has been designed to provide superior bass response thanks to a 3” woofer coupled with a 1” voice coil that handles longer linear excursion. A coated paper membrane has also been employed offering low resonance, stability and linearity. A passive radiator has also been added at the back to extend the frequency response of this small loudspeaker all the way down to 62Hz with very low distortion.
The SC203 master and slave system features four 30W PWM amplifiers, one for each driver, and a separate filter section. Connectivity includes analogue RCA phono, digital optical and USB ensuring that it fits in most setups. An additional volume controlled subwoofer output is included letting you add an additional subwoofer to the master speaker. The Eve SC203 come with FlexiPads allowing you not only to decouple the speakers from the desk but also angle them precisely at 0°, 7,5° or 15°.
For the SC203, Eve Audio developed a new µA.M.T. Tweeter which provides high resolution, low distortion and extraordinary precision and clarity. Using a folded membrane with a surface area of only 400mm² with integrated wave guide the tweeter achieves superb dispersion pattern over a wide frequency range.
Likes all Eve Audio Speakers, the SC203 uses high DSP electronics with one push button operation to give accurate level control, filter settings, LED brightness, input selector, and speaker position enabling you to optimally configure your speakers in your room. A 192kHz/24-bit A/D converter from Cirrus Logic is employed to deliver pristine signal to the DSP stage while the PWM amplifiers are connected directly to the DSP avoiding the need of additional conversion.
Eve Audio SC203 Main Features:
- 2-way Active Master/Slave Loudspeaker System
- 3” LF Woofer
- Passive Radiator at the back for extended Low Frequency
- New 1” µA.M.T. for high resolution, low distortion and extraordinary precision and clarity
- 30W amplification for each driver
- Connectivity: Analogue RCA, Digital Optical, USB
- Subwoofer output with level control on the master speaker.
- Included FlexiPads decouple and angle the speakers
- 192kHZ/24-Bit AD conversion by Cirrus Logic
- DSP Control of volume, LED Brightness, Filters, Input selection and speaker position
|Short Description||Small two-way active monitor system comprising of master and slave loudspeakers with DSP and passive radiator for extended low frequency response|
|Demo in Store||N/A|
|HF Driver||1" ART|
|LF Driver Size||3"|
|Horizontal or Vertical||Vertical|
ADD CUSTOM BUNDLE OF YOUR CHOICE
AND SAVE UP TO 65% ON PLUG-INS
CHOOSE YOUR CUSTOM BUNDLE:
No UAD-2 CUSTOM BUNDLE
Universal Audio UAD Custom 2 Bundle£190.83
SAVE UP TO 25%
Universal Audio UAD Custom 3 Bundle£282.50
SAVE UP TO 33%
Universal Audio UAD Custom 6 Bundle£440.83
SAVE UP TO 50%
Universal Audio UAD Custom 10 Bundle£624.17
SAVE UP TO 60%
Universal Audio UAD Ultimate 5 Upgrade Bundle£3,165.83
SAVE UP TO 65%