020 84452446
Genelec 8250A (Pair)

Genelec 8250A (Pair)

  • product images
  • product info
  • product specs
  • reviews

Genelec 8250A (Pair)

The Genelec 8250A Bi-Amped DSP Active Monitoring System (pair). Highly respected, 24 Bit/192 kHz, Bi-amplified DSP monitor system ideal for large recording studios, broadcast and surround installations, mastering suites and TV and post-production houses.

The Genelec 8250A bi-amplified DSP monitoring system lifts audio monitoring precision to an entirely new level of accuracy. Boasting performance comparable to much larger systems, the compact and powerful 8250A package is ideal in applications where a wide frequency response is needed but space is limited. The 8250A is the ideal monitoring tool for recording studios, post-production houses, broadcast installations, digital edit suites, home studios and mobile production vehicles. The Genelec 8250A builds on the rock-solid technology of the highly-acclaimed 8050A, featuring an ingenious, flow optimized, reflex port that provides solid, clear and articulated low frequencies without compression, distortion or port noises. Combined with the advanced Genelec Directivity Control Waveguide (DCW) and the rounded edges and gently curved front and sides of the MDE (Minimum Diffraction Enclosure) enclosure, the result is an astoundingly flat frequency response both on and off axis. Other benefits include superb imaging precision and minimum listening fatigue. Carefully designed dsp crossover filters with extremely steep roll-off characteristics feed dedicated power amplifiers for each of the low distortion drivers. The 8250 A features magnetic shielding, overload protection circuitry and versatile room response controls as standard. The Genelec Loudspeaker Manager (GLM) control network and software enhances further the performance of the 8250 A: it features adjustment of levels, distance delays and flexible room response improvement equalization with the reliable and robust AutoCal automated calibration system via the GLM control network. The 8250A has both analog and AES digital inputs in combination with a digital thru connection. Each Genelec 8250A is supplied with an Iso-Pod (Isolation Positioner/Decoupler) which eliminates coloration of the sound by decoupling the monitor from its mounting surface. The Iso-Pod also allows the monitor to be angled so that its acoustic axis points directly at the listener. For ideal mounting in differing environments, the Genelec 8250A includes integrated rear support points for floor and wall stands, with an additional M10 threaded mounting hole on the enclosure base. DSP products are available ONLY in black colour.

The main features of the Genelec 8250A include:

Highly respected, 24 Bit/192 kHz, Bi-amplified DSP monitor system ideal for large recording studios, broadcast and surround installations, mastering suites and TV and post-production houses
2-way biamplified studio monitor with 270 Watts of power and an active crossover
Magnetically shielded for use in close proximity to computer monitors
Metal grille covering for drivers
Rear panel Bass Reflex port
Isolation Position/Decoupler(Iso-Pod) rubber speaker mount allows for precise vertical or horizontal speaker positioning, separates speaker from placement surface, eliminating rumble and other vibration related resonances
Integrated rear support points for wall and floor stands, M10 threaded mounting hole on the enclosure base
Balanced XLR (female, pin 2 +) Analog Input
Digital audio input connector: XLR female
Digital audio input impedance: 110 Ohm
Digital audio Thru output connector: XLR male
Digital audio Thru output impedance: 110 Ohm
Digital audio format is AES/EBU (AES3-2003) - Can also be used with S/P-DIF and AES3id signals when impedance converters are used
Digital audio word length: 16 bits, maximum 24 bits - Fixed point, AES/EBU format
Digital audio sample rate: 32 kHz, maximum 192 kHz - Supports single-wire and dual-wire AES signals
AD conversion dynamic range: 122 dB - Gain-ranging operation in two gain ranges; converter dynamic range 112 dB typical
Versatile rear panel Treble and Bass Tilt and Bass Roll-Off tone control switches for optimizing speaker to acoustic character of room environment
Transparent Overload Protection circuitry
Switchable power supply for international use
SPL (Maximum short time sine wave acoustic output at 1 m on axis in half space, averaged from 100 Hz to 3 kHz): 110 dB SPL
Maximum peak acoustic output (per pair) with music material: 120 dB SPL @ 1m
8 inch bass driver
1 inch metal dome HF driver
Crossover frequency at 1.8 kHz
Free field frequency response: 38 Hz - 20 kHz (+/- 2 dB)
Amplifier power /ch: Bass 150 W and Treble 120 W
Monitor dimensions (H x W x D): 433 x 286 x 278 mm (Height with Iso-Pod 452 mm) or 17 1/16 x 11 1/4 x 10 15/16 inches (Height with Iso-Pod 17 13/16 inches)
Monitor weight 14.6 kg (32 lb)
Short Description The Genelec 8250A Bi-Amped DSP Active Monitoring System (pair). Highly respected, 24 Bit/192 kHz, Bi-amplified DSP monitor system ideal for large recording studios, broadcast and surround installations, mastering suites and TV and post-production houses.
Demo in Store N/A
Manufacturer Genelec
Old Price N/A
Powered, Passive Powered
Type Nearfield
HF Driver No
LF Driver Size 8"
Speaker Design 2-way
Ported No
EQ Correction Yes
Horizontal or Vertical No
Mounting System No

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Got a question about this product? We have the answer. CALL US: 020 84452446
contact Us
Inc. VAT: £2,698.00 Ex. VAT: £2,248.33
Available for Next Day Delivery.
configure your product
From per month

  • Related items / Alternative products
Digital & Analogue Audio Recording Studio Equipment from Uk & Europe’s Premiere Audio Gear Supplier - KMR Audio 2005-2015 - All Rights Reserved and Are Property of Respective Owners. Errors and omission excepted. Use of the site is governed by our terms and conditions.