020 84452446
Latch Lake MicKing 2200 Big Foot

Latch Lake MicKing 2200 Big Foot

  • product images
  • product info
  • product specs
  • reviews

Latch Lake MicKing 2200 Big Foot

The Latch Lake micKing 2200 Big Foot is the best mic stand we're aware of. Each part of this stand is a significant improvement on what we're all used to. It reaches angles and heights that other stands cant reach and then it keeps the mic exactly where you put it without ever drooping at all. If you've spent more than say £2k on a microphone then you should seriously consider getting one; it'll last forever and make the recording experience that much more enjoyable.

Features and benefits:

• Clever base design - very stable, small footprint
• Strong joints that are easy to adjust - never going to droop mid take
• Heavy, adjustable counterweight - safely hold even the heaviest mics even with a reflexion filter and pop shield attached
• Extremely hard wearing - this is the last stand you'll ever buy, your grand-children will pass it on to their grand-children
• Big reach - on a Latch Lake stand, each section of tube is approximately 1m long, the 2200 has two tubes on the boom and two on the mast (3300 has three on each).

• Drum overheads
• Holding a heavy vocal microphone in front of a singer that's sitting at a piano
• Holding stereo mic arrays (decca tree, mid-side, x-y stereo pair)
• Protecting your irreplacable vintage 1958 Sony C37A microphone
• Holding loads of mics at once without using up lots of floor space

If you're into microphones then get in touch and we'll ship you a stand to try out. If you decide that you can live without it then we'll cover the cost of having it collected.
Short Description Two sections of vertical mast and two on the boom mast with the base of the 3300. Ideal for a carpet floor.
Demo in Store Yes
Manufacturer Latch Lake
Old Price N/A

Customer Reviews

Resolution Magazine Latch Lake Review - Jon Thornton Review by oliver (at) biggerboatdistribution.com (Posted on 18/03/2012)
Latch Lake MicKing 2200
It’s the little things that can really make a difference in a recording session. A well brewed cuppa, nicely sorted lighting — and a mic stand
that actually stays where you set it. JON THORNTON

It is too easy to concentrate attention (and investment) on microphones and then attach them to something that is merely adequate. While a well sorted tripod-type stand
works well in many applications, there are some occasions where you realise that they just aren’t up to the job (witness my own rigging adventures with AEA’s monster 440 in the last issue V9.4). Coming to the rescue is a selection of stands (although probably more properly referred to as ‘stand systems’) from American manufacturer Latch Lake. With a history that started, somewhat bizarrely, with the manufacture of metal and glass guitar slides, the MicKing stands have been available since 2002, with newer additions to the range released in 2007.
The two main models are the MicKing 2200 and 3300, which differ chiefly in their overall size and reach. The original 3300 model, with three extending sections for the vertical mast and the boom, boasts a maximum horizontal reach of more than 10 feet, and a maximum height of nearly 20 feet. The 2200 supplied for the review is scaled down slightly. Here there are only two extending sections vertically and horizontally -- resulting in a horizontal reach of only (!) 7 feet and a maximum height of 14 feet.
Scaled down it might be but it’s still a beast of a stand, and shares many of the same clever features as its larger sibling. For example, there’s the weighted base, whose shape ensures that 90% of the weight is located at the outer rim, thus maximising stability with a small foot-print. And all of the stand adjustments (vertical mast height, boom extension, boom clutch) feature fold-over ‘lever locks’. These can be adjusted for ultimate grip and tightness courtesy of spring-mounted thumbscrews, and work extremely well and effectively. A nickelplated, slab-like counterweight can also be slid up and down the rear of the boom arm to compensate for extreme boom reach and/or heavy microphone loads.

All of this heavy duty engineering, together with the company laying claim to the world’s strongest boom clutch, can only lead to one thing. It positively encourages childishness and the creation of a range of experiments to gauge its ability to support small students as well as large microphones. And (students aside), it really is rock solid in pretty much any configuration you can think of. I’ll admit that the relatively small size of the base sometimes makes it appear less stable than it actually is and when working near the stand’s limits of extension some additional base weighting might be in order for peace of mind. But for those of nervous disposition (or working with less than
perfectly flat surfaces), Latch Lake will sell you a ‘BigFoot’ variant featuring a slightly wider base.

Just being big, butch and ever so slightly over-engineered isn’t the end of the story as there are some other neat features. The end of the boom features an additional clutch connected to a short ‘Spin Grip’ microphone mount. This additional axis of movement allows for some really accurate mic placement possibilities. The Spin Grip refers to the fact that the short stub will spin freely while the clutch is loosened, allowing it to be spun into the microphone clip/cage rather than the other way around (That’s really handy. Ed). And there is also the possibility of attaching additional Xtra Booms to the vertical mast. These feature their own clutch and short boom, and are intended for multiple mic applications when using the MicKing for the main overhead pair on a drum-kit, for example.
This is something you’ll certainly want to try out particularly in a smaller room, simply because of the amount of space the MicKings take up themselves! While I didn’t find it particularly easy to mic up an entire drum kit using just two stands and a bunch of Xtra Booms, I only needed to employ two additional stands to reach places the Xtra Booms couldn’t.
In short, these stands are wonderfully engineered and have many neat and useful features. In a smaller recording room they would perhaps be a little too big and cumbersome but in any application that needs to position microphones at reasonable heights, or reliably set heavyweight microphones, they perform admirably. The only downside is the price — a pair is going to set you back the same amount as a decent large diaphragm capacitor microphone. But you’ve got to balance this against the fact that they are absolutely bombproof.
Well, fire-proof anyway. The distributor showed me a photograph of a studio in the USA that unfortunately burned down to the ground. And, you guessed it, the only thing left standing was a MicKing stand. It’s a long-term investment but one that will certainly outlast the latest flavour of the month DAW. Heck, it’ll probably outlast you…

PROS: Rugged build; solid and stable at extreme reaches; neat design features; longevity.
CONS: Size of base may mean extra weighting required in some situations; could be a little large for some rooms.
Drummer Magazine Latch Lake Review Review by oliver (at) biggerboatdistribution.com (Posted on 18/03/2012)

We’ve all used lots of horribly
substandard mic stands in the
studio. I’ve seen shoddy clutches
that don’t quite tighten fully,
knurled screw tighteners that score
your fi ngers when you do them up,
and the oh-so-common drooping
boom arm that ruins your careful
mic placement. In their range of
heavy-duty mic stands Latch Lake
solve these problems with some
ingenious designs and very high
build quality.

The Latch Lake MicKing 2200 is
one of those pieces of equipment
that makes you realise just how
badly everything else performs,
like if Michael Jackson had been
featured on the X Factor.  The first
thing you need to know is that
this stand is a great deal more
than a regular one – it’s much
bigger, much more sturdy and,
of course, far more expensive.
However, you’ll be able to put, and
indeed keep, heavy microphones
into places in a studio that you
never thought possible.  e basic
stand will stretch to seven feet in
height whilst, at the same time,
the boom arm can extend to over
seven feet.  That’s a total of 14’!
The nickel-plated, adjustable,
detachable counterweight on the
end of the boom is heavy enough
to counteract the weight of at least
a couple of heavy microphones - I
was using two Coles 4038s which
are pretty heavy mics whilst the
12 kilogram bass plate keeps
everything grounded and stable.
Even pushing this thing when
it’s at full stretch doesn’t rock it.
This is because the bass plate is
designed so that the majority of
the load is on the outside of
the legs whilst keeping the
footprint extremely small –
small enough, in fact, to take
up less fl oor space than a
regular stand.  e whole thing
is very heavy (I lifted the lot up
to my studio on the third floor
– not fun!) so to aid movement
around the room there’s a set
of wheels on the base. Tilt the
thing back and you can move it
around until you’re happy with its
placement. Plus to save your poor,
overworked hands each tightener
is a quick release solid metal lock
– no more twisting and trying to
overexert just to hold the tubes in

Latch Lake claim that you can
mic up an entire kit with just two
stands.  This is achieved by adding
on the Xtra Boom(s), which works
in a similar way to a multi-clamp
and boom arm for an extra cymbal
on the kit. You can add as many
as needed and can indeed mic up
a whole kit, room mics and close
mics together, from a couple of
stands.  The Xtra Boom will clamp
onto any of your existing stands
too, a very useful feature to save on
floor space.

Latch Lake has made a worldbeating
mic stand that allows
you placement opportunities you
never thought possible. The base
plate takes up very little fl oor
space making them extremely
space effi cient and the Xtra Boom
arms add greatly to the effi ciency.
I never thought I’d get excited
about a mic stand but I have
never used a better mic stand
than this. Pricey, but ultimately
well worth it.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Got a question about this product? We have the answer. CALL US: 020 84452446
contact Us
Inc. VAT: £504.00 Ex. VAT: £420.00
Usually shipped in 1-3 days.
  • Related items / Alternative products
Digital & Analogue Audio Recording Studio Equipment from Uk & Europe’s Premiere Audio Gear Supplier - KMR Audio 2005-2015 - All Rights Reserved and Are Property of Respective Owners. Errors and omission excepted. Use of the site is governed by our terms and conditions.