- product images
- product info
- product specs
The Maselec MTC-2 is a fully featured mastering analogue stereo transfer system designed to offer a truly pristine sound and ergonomic design.
The Maselec MTC-2 comprises three different modules, the Master controller unit, the MT6 Monitor Controller and the Master Router. The Master Control gives you access to the input section with +/-10dB gain, phase reverse and cut controls for both left and right channels and frequency selectable low cut and high cut situated just before the insert points. AES input source can easily be selected via any of the four-into-one passive selected D1 to D4.
The insert section comprises 6 hard-switched inserts easily selectable via the 6 insert buttons. Before reaching the insert points the signal is split into separate feeds to ensure total isolation from signal path while providing signal for A/B comparison. Engage an insert and the feed of the insert is used. Insert 1 and 2 can be used as Mid/Side modes with the left channel being the Mid and right channel the Side. This process makes it easy to modify the stereo image with external processors such as EQ, compressors, and more. Insert 6 can be positioned pre or post fader with the latter placing the insert after the output section.
The output section features a FX send and return which can also be used as an additional insert point. The output level can be controlled via the cut switch and the output fader which can also serve to control the FX return level. The output sections lets you control the final stereo image thanks to an elliptical filter which lets you turn stereo LF signals into mono, removing out of phase elements, and a stereo width control which lets you improve the stereo imaging without affecting the phase. The stereo width is not achieved by using M/S matrixes and therefore remains 100% mono compatible. Finally the output levels can be set for left and right channels separately with 0.5dB steps giving you impressive level of control.
For surround applications, the MTC-2 two can be augmented by the MTC-6 monitor control which adds 16 monitor inputs as well as extensive surround options.
Maselec MTC-2 Main Features:
- Fully featured analogue stereo transfer system
- Truly pristine mastering grade sound quality
- Ergonomic design
- +/-10dB input gain
- Phase reversal
- LF and HF cut before insert points
- AES 4-to-1 AES input selector
- 6 insert points
- Mid/Side mode for insert 1 and 2
- Pre/Post Fader mode for Insert 6
- FX Send and Return
- Elliptic filter to keep bass mono
- Stereo Width control retains 100% mono compatibility
- Left and Right Output level controls
|Short Description||Stereo Mastering Transfer Console and monitoring system. Comprises a master control unit and master router.|
|Demo in Store||N/A|
- Related items / Alternative products
- Recently viewed items
Inc. VAT: £599.00 Ex. VAT: £499.17
Inc. VAT: £279.00 Ex. VAT: £232.50
Inc. VAT: £89.00 Ex. VAT: £74.17
Inc. VAT: £3,999.00 Ex. VAT: £3,332.50
Inc. VAT: £439.00 Ex. VAT: £365.83