The PMC Twotwo Sub2 is a 10” low distortion active subwoofer with ATL technology, 600W Class D amplification as well as a rigid, highly braced low resonance cabinet and DSP filtering.
The PMC TwoTwo Sub2 is designed to work primarily with its Twotwo range of nearfield monitors including the Twotwo 5, Twotwo6 and Twotwo 8. The Sub2 provides a more extensive dynamic response than the twotwo sub1 and greater headroom.
Core to PMC’s line of speakers and sub is the use of Advanced Transmission Line technology which delivers cleaner and deeper bass over traditional ported designs. It works by absorbing undesirable frequencies radiating from the rear of the speaker and letting only the lowest frequencies to come through a front baffle vent. This vent works as an auxiliary LF driver, extending LF driver’s response while greatly reducing harmonic distortion created by removing undesirable low frequencies that would cloud the upper bass and lower midrange.
The result is an extended low-frequency response from a smaller cabinet for a richer, full sounding result with a consistent and defined low end regardless of listening levels.
The TwoTwo Sub2 boasts a long-throw bass driver that uses a unique flat piston design made of a carbon-fibre/Nomex sandwich. It produces an unparalleled transient response and powerful audio performance fare more potent than its size suggests. As a result, the flatter design is easier to place than typical cube-shaped designs.
The TwoTwo Sub2 offers a wealth of connections to integrate seamlessly with your setup. It starts with an AES3 input and a built-in high-quality sample rate converter allowing to accept digital audio at samples rates ranging between 32 and 192kHz. Furthermore, it includes two stereo analogue XLR inputs which are always active regardless of the source connected. The source can be selected at the back of the subwoofer or using the optional RC1 remote.
The Digital signal can be passed through both digital and analogue outputs allowing the sub to be used as a high-end digital-to-analogue converter to driver additional analogue monitors from the digital stream.
The Twotwo Sub2 can be used in a 2.1 configuration with other speakers in the twotwo series of nearfield monitors to provide additional bass details and SPL or as an LFE channel in a surround system.
The included parametric EQ to help with in-room alignment while a high-pass filter is included for both digital analogue outputs to feed satellites.
|AT A GLANCE|
|Demo in Store||No|
|Short Description||10” low distortion active subwoofer with ATL technology, 600W Class D amplification as well as a rigid, highly braced low resonance cabinet and DSP filtering.|
|LF Driver Size||8"|