- product images
- product info
- product specs
The 8 segment LED VU meter follows the balanced output of the preamp. The level of the VU meter is adjustable over the entire range from off to +28. The Peak led is set at +14VU or +18 dBu and can grab a fast peak and display it. With the "a" version, an internal jumper selects the Mic Pre Main Output or the Mic Pre Gain Stage signal to feed the VU Meter. This allows the engineer to monitor the real mic pre gain or the output level of the MP1a. When monitoring the Mic Pre Gain, the meter shows the actual gain stage level, and is not effected by the output fader.
The Combo XLR/Direct input is for use with a hi-z instrument, etc. The Tilt tone control works with both the Mic in and Direct in and has it's own "Tilt EQ In" switch, which is a hard wire bypass switch when out. When turned up, the tilt control has a 0 to 6 dB boost on the high end while cutting the low end the same. If it is turned down, tilt will boost the low end up to 6 dB and cut the high end up to 6 dB.
The front panel XLR is multed to the rear panel XLR and that is also multed to the D-Sub "Input" on the rear of the V-Rack. The "Insert Return" input of the V-Rack is a resistor isolated mic level input, that can be used when the MP1 is in a live recording situation and there is no splitter. It will bridge the mic line with 10X the impedance to minimize loading of the microphone.
|Short Description||500 Series Discrete Mic Pre w/ Tilt EQ.|
|Demo in Store||N/A|
- Related items / Alternative products
- Recently viewed items
ADD CUSTOM BUNDLE OF YOUR CHOICE
AND SAVE UP TO 65% ON PLUG-INS
CHOOSE YOUR CUSTOM BUNDLE:
No UAD-2 CUSTOM BUNDLE
Universal Audio UAD Custom 2 Bundle£190.83
SAVE UP TO 25%
Universal Audio UAD Custom 3 Bundle£282.50
SAVE UP TO 33%
Universal Audio UAD Custom 6 Bundle£440.83
SAVE UP TO 50%
Universal Audio UAD Custom 10 Bundle£624.17
SAVE UP TO 60%
Universal Audio UAD Ultimate 5 Upgrade Bundle£3,165.83
SAVE UP TO 65%