4-channel mic preamp taken directly from the 710 Twin-Finity dual topology mic preamp with added 1176-style compression and eight-channel AD conversion.
At a glance
Phase-aligned "tone blending" of tube and solid-state
Newly designed 1176-style compression/soft-limiting circuit on each mic channel
Monolithic balanced output stage
Dual gain stages
Balanced send/return inserts
Discrete JFET DI with 2.2M ohm ultra-hi-Z impedance
70dB+ of gain, +48-volt phantom power, pad (15dB), phase invert, and low-cut filter (75Hz)
Front-panel hi-Z input (switched from mic/line)
Rear-panel XLR mic input, XLR line input, and XLR line output
Digital output via dual ADAT optical or AES/EBU (DB-25)
Eight channels of high-quality 24-bit/192kHz A/D conversion
The Universal Audio 4-710d is a 4-channel mic preamp taken directly from the 710 Twin-Finity dual topology mic preamp with added 1176-style compression and eight-channel AD conversion.
The Universal Audio 4-710d boasts the same dual topology design as the Twin-finity, combining a pristine Class A FET preamp circuit and a separate Class A triode valve preamp. A tone-blending control then lets you blend the two perfectly phased aligned signals to taste thanks to the included tone blending knob. Each of the four mic preamps enables you to choose individually between the clean and open sound of the 100% solid-state or the thicker and rounder sound of the tube signal path, and anything in between. You can now get the best of both worlds in a convenient and powerful package.
The 4-710d sees the addition of a newly designed 1176 style compressor/soft limiter on each channel with a choice of fast and slow settings based on the most popular settings of the iconic compressor it takes inspiration from.
The 4-710 also includes a 24-bit A/D converter up to 24-bit 192kHz. The converter technology is taken directly from their highly popular 2192 Master converter which is still very popular in the recording world. It lets you digitise eight-channel in total and includes an additional four line-level inputs at the back for other instruments if necessary. With both ADAT "light pipe" or AES/EBU via DB-25 connectors, the 4-710d easily integrates with any recording setup.
Phase-aligned "tone blending" of tube and solid-state
Newly designed 1176-style compression/soft-limiting circuit on each mic channel
Monolithic balanced output stage
Dual gain stages
Balanced send/return inserts
Discrete JFET DI with 2.2M ohm ultra-hi-Z impedance
70dB+ of gain, +48-volt phantom power, pad (15dB), phase invert, and low-cut filter (75Hz)
Front-panel hi-Z input (switched from mic/line)
Rear-panel XLR mic input, XLR line input, and XLR line output
Digital output via dual ADAT optical or AES/EBU (DB-25)
Eight channels of high-quality 24-bit/192kHz A/D conversion
Demo in Store
No
Manufacturer
Universal Audio
Short Description
4-channel mic preamp taken directly from the 710 Twin-Finity dual topology mic preamp with added 1176-style compression and eight-channel AD conversion.
I would like to pay over months with the first payment deferred for months
Monthly payments of
£
% APR (representative)
Finance Amount
£
Interest Payable
£
Total Amount Payable
£
Total Amount Payable Includes Deposit Amount.
The figures shown are an illustration based on the cost of goods. Final details including shipping and discounts where applicable will be displayed on the checkout page.
Credit subject to status and affordability. Terms & Conditions Apply. KMR Audio Ltd trading as KMR Audio Ltd is a credit broker and is Authorised and Regulated by the Financial Conduct Authority. Credit is provided by Novuna Personal Finance, a trading style of Novuna Capital (UK) PLC, authorised and regulated by the Financial Conduct Authority. Financial Services Register no. 704348. The register can be accessed through http://www.fca.org.uk.
IMPORTANT: Novuna Capital rounds down the monthly payments, which may result in your total amount payable being less than the total cash price.